Product Code: S 1008 – Green
Recommended Firing Temperature Range: 1020–1060 °C
Form: Supplied in liquid form in 175 g, 500 g, and 1000 g packages.
Application Properties:
• In thin applications, this glaze produces light pine green tones. As the application thickness increases, it develops dark pine green effects and metallic variations.
• It has a semi-transparent finish. As the application thickness increases, it becomes more opaque.
• The surface finish is glossy.
• It may cause glaze cracking (crazing).
• It contains toxic substances. It is not suitable for food contact.
Application Methods:
• Suitable for brush application; the recommended application thickness is 2 to 3 coats.
• For spray gun or dipping applications, approximately 5–30% water addition is recommended to adjust the viscosity.
• The recommended specific gravity (Baumé) range is 45–55.
Testing Recommendation:
• We recommend that customers using our glazes for the first time prepare test tiles to observe the results according to their own firing schedules and application methods. Preparing test tiles on both vertical and horizontal surfaces according to your application method will be useful for becoming familiar with the glaze.
• The product shown in the image has been applied over CMR 250 white casting clay. Since the glaze is semi-transparent, its color and artistic effects may vary when applied over colored clays.
• When combining artistic glazes with another artistic glaze or other glaze groups, we recommend testing the combination to avoid potential application or firing issues.
Care and Cleaning:
• When the product is washed in a dishwasher, the glaze surface may be exposed to high-temperature chemical solutions, which may result in matting or variations in its artistic properties.
Safety:
• The use of personal protective equipment is recommended during application.
• Since glazes interact with heat, it is recommended to keep them away from sources of fire and open flames during application.
• Children should use the product under supervision.
Storage:
• Store the products in airtight conditions and away from direct sunlight.
• If the products are stored for a very long time, they may begin to dry out. In this case, add a small amount of water, mix thoroughly, strain, and use.
• After the package has been opened, as the shelf life extends, the application aids, stabilizers, and antibacterial agents contained in the glazes may gradually lose their effectiveness. This generally does not affect the firing result of the glaze, but it may affect application performance; application may become more difficult, or cracks may appear on the surface before firing. If you encounter such a situation, please contact us for possible solutions.
