GL 687 – Glimmer Lilac

Product Code: GL 687 / Glimmer Lilac

Recommended Firing Temperature Range: 1030–1060 °C

Form: Supplied in liquid form in 175 g, 500 g, and 1000 g packages.

Application Properties:

• It is an artistic glaze that creates dynamic green speckles on a purple surface. In thin applications, the distribution of green speckles decreases because the glimmer particles adhere less to the surface. As the application thickness increases, the number of particles increases, resulting in more dominant green speckle effects on the surface.

• It has a semi-transparent finish. As the application thickness increases, the transparency decreases.

• The surface finish is glossy.

• It is not acid-resistant. Therefore, contact with acidic foods is not recommended.

• It contains no toxic substances.

NOTE: Particle-containing glazes require high viscosity to keep the particles suspended. Therefore, they are more suitable for brush application. In pouring or dipping applications, the reduced viscosity of the glaze causes the particles to settle to the bottom, as they cannot remain suspended. This may negatively affect the homogeneous distribution of the speckles on the surface during application.

Application Methods:

• Suitable for brush application; the recommended application thickness is 1 to 3 coats.

• For spray gun or dipping applications, approximately 5–30% water addition is recommended to adjust the viscosity.

• The recommended specific gravity (Baumé) range is 45–55.

Testing Recommendation:

• We recommend that customers using our glazes for the first time prepare test tiles to observe the results according to their own firing schedules and application methods. Preparing test tiles on both vertical and horizontal surfaces according to your application method will be useful for becoming familiar with the glaze.

• The product shown in the image has been applied over CMR 250 white casting clay.

• When combining artistic glazes with another artistic glaze or other glaze groups, we recommend testing the combination to avoid potential application or firing issues.

Care and Cleaning:

• When the product is washed in a dishwasher, the glaze surface may be exposed to high-temperature chemical solutions, which may result in matting or variations in its artistic properties.

Safety:

• The use of personal protective equipment is recommended during application.

• Since glazes interact with heat, it is recommended to keep them away from sources of fire and open flames during application.

• Children should use the product under supervision.

Storage:

• Store the products in airtight conditions and away from direct sunlight.

• If the products are stored for a very long time, they may begin to dry out. In this case, add a small amount of water, mix thoroughly, strain, and use.

• After the package has been opened, as the shelf life extends, the application aids, stabilizers, and antibacterial agents contained in the glazes may gradually lose their effectiveness. This generally does not affect the firing result of the glaze, but it may affect application performance; application may become more difficult, or cracks may appear on the surface before firing. If you encounter such a situation, please contact us for possible solutions.