S 1026 – Faralya
Features:
. 1030 °C- 1060 °C
. Food Safe
. Low Fire
. Suitable for functional tableware use
S 1026
Recommended Firing Range: 1030 – 1060 °C
Form: Supplied in liquid form in 175 g, 500 g, and 1000 g packaging.
Application Properties
- Produces pistachio green tones in thin applications and turquoise tones in thicker applications. Contains white and light blue speckles; the visibility and distribution of these speckles may vary depending on application thickness.
- Semi-transparent structure.
- Glossy surface finish.
- Food safe; recommended for tableware use.
Application Methods
- Suitable for brush application; recommended application thickness is 1–2 coats.
- For spraying or dipping, adjust viscosity by adding approximately 5–30% water.
- Recommended Baume range: 45–55.
Testing Recommendation
We recommend that customers using our glazes for the first time prepare test tiles under their own firing conditions and application methods. Preparing test pieces in both vertical and horizontal forms according to your technique will help in understanding the glaze behavior.
The product shown in the image was applied on CMR 250 white casting porcelain clay body.
When combining artistic glazes with other artistic or glaze groups, testing is strongly recommended to avoid potential issues.
Maintenance & Cleaning
Dishwasher use may expose the glaze surface to high-temperature chemical detergents, which may cause matting or changes in artistic properties.
Safety
- Personal protective equipment is recommended during application.
- Keep away from fire and open flame sources during application, as glazes react to high heat.
- Children should apply only under supervision.
Storage
- Store in airtight conditions away from direct sunlight.
- If the product dries over time, add a small amount of water, mix thoroughly, and sieve before use.
- After opening, binders, stabilizers, and preservatives may gradually lose effectiveness. This generally does not affect firing results, but may impact application performance, potentially causing difficulty in application or pre-firing cracking. If such issues occur, please contact us for assistance.
- All ready to use glazes are available in 118 ml, 335 ml and 670 ml jars.
- Our glazes are formulated ready to use in liquid forms.
- It is recommended to apply by brush two to three even coats.
- For other application methods you can add 5 %- 10 % water for diluting.
- Before application, the glaze should be homogeneous.
- We suggest you to test glazes on tiles and later on make final applications.
