SP 1224 – Orchid

Features:

. 1200 °C-1220 °C
. Food Safe
. High Fire
. Tends to Run

Recommended Firing Temperature: 1180–1220°C

Packaging: Supplied as a liquid glaze in 175 g, 500 g, and 1000 g containers.

This glaze features a cream-colored base tone. Due to the brown speckles within the glaze, its artistic effects may become more or less pronounced across the surface. The main difference between thin and thick applications is the increase in the artistic mottling effect. As the glaze is applied more heavily, soft vein-like streaks in pale purple, blue, and white tones develop along the direction of the glaze flow.
Glossy surface finish.
Semi-transparent glaze.
Highly fluid within the recommended firing temperature range.
Acid-resistant and free from toxic substances.

For brush application, 1–3 coats are recommended.
For spray or dip application, adding approximately 5–30% water is recommended to achieve the desired consistency.
Recommended Baumé range: 45–55°Bé.

We recommend that first-time users perform test firings using their own kiln schedule and application methods before production. Preparing both vertical and horizontal test tiles will help you better understand the glaze’s behavior.
The sample shown was applied over BNC 1200 White Porcelain Body. Because this glaze is semi-transparent, its color and artistic effects may vary when applied to colored clay bodies.
When combining this artistic glaze with another artistic glaze or any other glaze series, we strongly recommend conducting test firings beforehand to avoid unexpected results.

When washed in a dishwasher, the glaze surface may be exposed to high-temperature chemical detergents. Over time, this may cause slight dulling or changes in the glaze’s artistic appearance.

The use of appropriate personal protective equipment (PPE) during application is recommended.
As glazes are heat-reactive materials, keep them away from flames and ignition sources during application.
Children should only use the product under adult supervision.

Store the product in an airtight container, protected from direct sunlight.
If the glaze thickens or begins to dry after prolonged storage, add a small amount of water, mix thoroughly, and strain before use.
After opening, the application additives contained in the glaze—such as flow enhancers, stabilizers, and preservatives—may gradually lose their effectiveness over time. While this generally does not affect the fired result, it may reduce application performance, making the glaze more difficult to apply or causing surface cracking before firing. If you encounter such issues, please contact us for technical support.

are you not sure which Product to choose?