SP 1491 – Green Almond

Product Code: SP 1491 – Green Almond

Recommended Firing Range: 1180–1250°C
Form: Supplied in liquid form in 175 g, 500 g, and 1000 g packages.

 

Application Characteristics

• A glossy and dynamic glaze in light turquoise tones with fine surface vibrations. In thin applications, the vibrating texture decreases, resulting in a stable light turquoise blue surface. As the application thickness increases, transitions of light green, yellow, and white vibrations appear, creating an artistic effect.
• At 1180°C, the glaze is opaque; between 1200–1250°C, the surface becomes semi-opaque.
• Glossy surface finish.
• Semi-opaque glaze.
• No running tendency in the 1180–1220°C range. Between 1220–1250°C, running may occur depending on application thickness.
• Acid-resistant.
• Does not contain toxic substances.

 

Application Methods

• Suitable for brush application; recommended thickness is 1–2 coats.
• For spray (pistol) or dipping methods, add approximately 5–30% water to adjust density.
• Recommended Baumé range: 45–55.

 

Testing Recommendation

• For first-time users, we recommend preparing test tiles under your own kiln conditions and application methods to evaluate results. Preparing both vertical and horizontal test pieces helps in understanding glaze behavior.
• In the product image, the glaze was applied on BNC 1200 white porcelain clay.
• When combining artistic glazes with other artistic or different glaze groups, testing is recommended to avoid possible defects.

 

Care and Cleaning

• When washed in a dishwasher, the glaze surface may be exposed to high-temperature chemical solutions, which may cause matting or variations in artistic characteristics.

 

Safety

• Personal protective equipment is recommended during application.
• As glazes interact with heat, keep away from fire and open flame sources during application.
• Children should use the product under adult supervision.

 

Storage

• Store in airtight conditions and protect from direct sunlight.
• If stored for a long time, the product may begin to dry. In this case, add some water, mix thoroughly, and sieve before use.
• After opening, over time, brushing agents, stabilizers, and antibacterial additives may lose effectiveness. This generally does not affect the firing result but may influence application performance (e.g., more difficult application or pre-firing surface cracking). Contact us for recommendations if this occurs.