SP 1512 – Jade

Recommended Firing Range

1200–1250°C

Packaging

Available as a liquid glaze in 175 g, 500 g, and 1000 g containers.

Product Features

• A pistachio green-toned artistic glaze with a fine textured vibration that results in a matte finish.
• In thin applications, the vibrational surface effect becomes more subtle. As application thickness increases, the texture becomes more pronounced and visible.
• The glaze maintains a consistent color regardless of thickness; no color shift occurs between thin and thick applications.
• At 1250°C, the surface develops a satin-matte to semi-gloss finish, with a slightly increased sheen.
• At 1220°C, the result is predominantly matte, while higher firing temperatures increase surface gloss.
• Opaque glaze.
• No running at 1200°C. At 1230–1250°C, it may exhibit slight fluidity.
• Acid resistant and free from toxic substances.

Application Methods

• Suitable for brush application, with a recommended thickness of 1–2 coats.
• For spraying or dipping, dilute with approximately 5–30% water to adjust consistency.
• Recommended specific gravity: 45–55° Bé.

Testing Recommendations

• We recommend first-time users test the glaze under their own kiln schedules and application methods before production use.
• Preparing both vertical and horizontal test tiles will help evaluate the glaze’s surface behavior.
• The sample shown was applied over BNC 1200 White Porcelain Clay.
• When combining artistic glazes with other glaze systems, testing is strongly recommended to avoid unexpected results.

Care & Cleaning

• Dishwasher exposure may subject the glaze to high-temperature chemical detergents. Over time, this may alter the matte or artistic surface characteristics.

Safety

• Use appropriate personal protective equipment (PPE) during application.
• Keep away from open flames and ignition sources during use.
• Children should only apply under adult supervision.

Storage

• Store in a tightly sealed container away from direct sunlight and moisture.
• If the glaze thickens over time, add a small amount of water, mix thoroughly, and strain before use.
• After opening, application additives such as flow modifiers and stabilizers may gradually lose effectiveness. While this generally does not affect firing results, it may reduce application performance or cause pre-firing cracking. In such cases, please contact us for support.