Product Code: SP 1601 – High-Fire Opaque White

Recommended Firing Range

1180–1250°C

Form

Supplied as a liquid glaze in 175 g, 500 g, and 1000 g packaging.

Application Characteristics

• An opaque white glaze that provides excellent covering power, concealing both the surface and the color of the clay body to create a smooth, uniform, glossy white finish. Its opaque composition delivers a clean, refined, and aesthetically pleasing appearance.
• For optimal results, the glaze should be applied evenly at a consistent thickness across the entire surface.
• Glossy surface finish.
• High opacity.
• Non-flowing within the recommended firing temperature range.
• Acid-resistant and free from toxic substances.
• Suitable for tableware applications.

Application Methods

• Suitable for brush application. The recommended application thickness is 2–3 coats.
• For spray gun or dipping applications, it is recommended to dilute the glaze with approximately 5–30% water to achieve the desired consistency.
• Recommended Baumé (Bé) range: 40–48.

Testing Recommendations

• We recommend that first-time users prepare test tiles using their own firing schedule and application techniques before production. Testing on both vertical and horizontal surfaces according to your application method will help you better understand the glaze’s behavior.
• The sample shown in the product image was applied over BNC 1200 Porcelain Casting Slip.
• When combining this glaze with artistic glazes or other glaze series, we recommend conducting tests beforehand to avoid unexpected results.

Care and Cleaning

• When washed in a dishwasher, the glaze surface may be exposed to high-temperature chemical detergents, which may result in slight changes to the surface appearance or gloss over time.

Safety

• The use of appropriate personal protective equipment (PPE) is recommended during application.
• Since glazes react to heat, keep them away from open flames and ignition sources during application.
• Children should use the product only under adult supervision.

Storage

• Store the product in an airtight container, protected from direct sunlight.
• If stored for an extended period, the glaze may begin to dry. In this case, add a small amount of water, mix thoroughly, and strain before use.
• After opening, the application enhancers, stabilizers, and preservatives contained in the glaze may gradually lose their effectiveness over time. This generally does not affect the fired result, but it may reduce application performance, making the glaze more difficult to apply or causing pre-firing surface cracking. If you encounter such issues, please contact us for technical support and recommended solutions.